Logo

    twitterlinkedinyoutube

    Order Online

    Anatomy of a Hannay Hose Reel

    1. Bearings: Weight of spool and hose is supported by bearings.
      1. Back Bearing
      2. Front Bearing
    2. Disc: Rolled edges prevent hose damage and add rigidity to disc. Additional strength is provided by a concentric rib.
    3. Drum: Roll-formed steel with full-length weld.
    4. Tie Rods join discs and drum to form spool. Reinforced with pipe spacers for rigidity and strength.
    5. Chain and Sprocket Drive: Provides smooth positive rewinding on powered reels.
    6. Rewind Motor: Electric rewind motor is shown. Compressed air or hydraulic motors can be used.
    7. Hub Assembly: Includes the fluid hub, the outlet riser, and the reel axle. Fluid passes from the swivel joint inlet through the hub assembly, to the hose.
      1. Outlet Riser: Contoured to match the curve of the reel drum so hose will wrap smoothly.
      2. Fluid hub
    8. Swivel Joint Inlet: Permits reel to rotate freely while connected to the fluid source. Joint is not used as a bearing. Straight or 90-degree swivel joints are available for most models. (Flexible connector must be used between swivel joint and inlet piping or warranty will be void.)
    9. Brake/Rewind Assembly: Bevel gear rewind has an adjustable tension brake. Rewind and braking device vary with different models.
    10. Front Frame
    11. Back Frame
    12. Front Foot
    13. Back Foot

    Numbered Hannay Hose drawing.

     

    General Specifications of Hannay Hose Reels

    Construction: Frames, discs, and drums are fabricated of heavy gauge steel. Bearings are self-aligning. Malleable iron and steel are used for hose reel hub assembly, outlet riser, and swivel joints. Stainless steel, aluminum, bronze, and other alloys, and special swivel joint packing, can be supplied to meet special requirements.

    Finish: Standard finish is oven-cured enamel. Finishes other than standards, such as special primers, polished aluminum, unpolished stainless steel and hot-dipped galvanized may be specified at extra cost.

    Temperatures & Pressures: Standard reel construction will handle most liquids or gases at temperatures ranging from -20 degrees to +400 degrees F (-29 degrees to +204 degrees C). Operating pressures available up to 10,000 psi (695 BAR) depending on the specific reel series. These operating pressures and temperatures are shown in descriptive ages in each product catalog. Reels to operate at pressures and temperatures other than standard are available at extra cost.

    Shipping: Reels are shipped completely assembled, ready to install. Installation instructions are supplied with each reel.

     

    More blogs like this one

     

     

    Like this Article? Why not Share!

     



    Download Our App

    Easily order new parts, easily locate our branches, and easily check your orders on the go. That’s the Tarantin App. Download it today.

    Apple DownloadGoogle Play Download

    Don’t have an online ordering account? CLICK HERE to sign up today.

    Location

    Address: 86 Vanderveer Road
    Freehold, NJ 07728

    Phone: 1 800.922.0724

    Fax: 1 732.780.5173

    Follow Us:

     

     

     

     

      

    facebook icon twitter icon linkedin icon youtube icon